 TeraFlex shock bar-pin eliminators...  TeraFlex shock bar-pin eliminators bolt to the stock front lower shock mounting location. |  A front track-bar drop bracket...  A front track-bar drop bracket bolts in the stock track bar mount and is also through-bolted to the frame. |  TeraFlex also provided a steering...  TeraFlex also provided a steering box skidplate to protect the vulnerable steering gear. |
 The lower control arm frame...  The lower control arm frame brackets secure to the frame in the stock skidplate mounts. |  The rear upper control arm...  The rear upper control arm brackets were positioned on the framerail with the modular FlexArms in place. |  The triangulated four-link...  The triangulated four-link rear upper suspension truss was positioned atop the rear axle and bolted in place. |
 With the proper positioning...  With the proper positioning of the suspension truss determined, the ORW crew then welded it in place. |  The suspension frame brackets...  The suspension frame brackets were also welded in place. |  TeraFlex provides rear lower...  TeraFlex provides rear lower shock mount relocaters to move the rear shocks farther outboard from the axle. |
 The rear upper shock bar-pin...  The rear upper shock bar-pin eliminators are sunken into the factory mounts to ease installation. |  Here the installation of the...  Here the installation of the rear suspension components is shown complete. |  The TeraFlex Extreme Short...  The TeraFlex Extreme Short Shaft Kit utilizes a much stronger and shorter rear output shaft. |
 An electronic speedometer...  An electronic speedometer sensor replaces the stock geardrive sensor. |  TeraFlex offers ready-to-install...  TeraFlex offers ready-to-install CV driveshafts. |  Here the TeraFlex Extreme...  Here the TeraFlex Extreme Short Shaft Kit is shown installed on the NP231 transfer case. |