 The TeraFlex modular FlexArms...  The TeraFlex modular FlexArms feature preassembled one-piece forged ends with spherical urethane Flex ends. |  The kit includes aluminum...  The kit includes aluminum body spacers, a shift linkage plate, engine lift blocks (not shown), grille support spacers, and necessary hardware. |  Shock-stem eliminator and...  Shock-stem eliminator and bar-pin eliminator kits are included with the LCG system to facilitate use of shocks with eye-eye mounts. |
 The Tera Extreme Short Shaft...  The Tera Extreme Short Shaft kit includes a new, heavy-duty short output shaft and output housing. |  The crew at ORW in San Diego,...  The crew at ORW in San Diego, California, installed the TeraFlex body lift and engine lift blocks. |  The factory frame brackets...  The factory frame brackets were then removed using a plasma torch. |
 The stock exhaust was cut...  The stock exhaust was cut off just after the collector to make room for the new long-arms. |  With the factory frame brackets...  With the factory frame brackets removed, the front upper arm mounting brackets were set in place with the modular FlexArms. |  Once the proper positioning...  Once the proper positioning was determined, the front upper arm frame brackets were welded in place. |
 The lower arm mounting brackets...  The lower arm mounting brackets were also installed on the framerails, and the modular FlexArms were then secured to the axles. |  The lower arm spherical rod...  The lower arm spherical rod end was secured to the stock control arm mount. |  With the front coil spring...  With the front coil spring in place, the new aluminum lower bumpstops were secured in place in the coil-spring bucket. |
 TeraFlex provides brake-line...  TeraFlex provides brake-line extension brackets for the front brake-line frame mounts. |  The TeraFlex shock-stem eliminators...  The TeraFlex shock-stem eliminators install in the upper shock tower and permit use of a shock with an eye mount. | |