4Wheel Drive & Sport Utility Homepage 4Wheel Drive & Sport Utility Magazine
Home»Technical»Dana 20 Transfer Case with TeraLow Gearset - Going Slow»Photo 22

02074wd Tera22 Zoom

Next, the original rear bearing shims and cover plate were bolted on. Endplay on the front output shaft was adjusted by changing these shims and should be between 0.001- and 0.003-inch.
Dana 20 Transfer Case with TeraLow Gearset - Going Slow

 Next, the original rear bearing shims and cover plate were bolted on. Endplay on the front output shaft was adjusted by changing these shims and should be between 0.001- and 0.003-inch.  View Related Article

 

Get Adobe Flash player

Car Research Guide