4Wheel Drive & Sport Utility Homepage 4Wheel Drive & Sport Utility Magazine
Home»Technical»Jeep Wrangler TJ Suspension»Photo 5

03104wd Fulltraction05 Z

4. We used a grinder to remove the front upper control arm mounts from the frame. With the new upper control arm support brackets in place, we measured from a reference point so the brackets would be even side-to-side, then marked and drilled the frame. The bracket was then bolted in place.
Jeep Wrangler TJ Suspension

 4. We used a grinder to remove the front upper control arm mounts from the frame. With the new upper control arm support brackets in place, we measured from a reference point so the brackets would be even side-to-side, then marked and drilled the frame. The bracket was then bolted in place.  View Related Article

 

Get Adobe Flash player

Car Research Guide