Jeep Body Armor - Bolt-On Brawn

Once all of the appropriate holes were drilled in the body of our '03 Wrangler Rubicon, the ORE crew removed the Rokmen Mercenary sliders and corners and sent them to a local powdercoater. Scientific Spray Finshes in Fullerton, California, did an awesome job of applying a flat black powdercoat finish and got the parts back to us in record time.

Before installing the freshly coated parts, they applied black silicone to the backsides around the bolt holes and across the upper edges. This was done to lessen the chance of rust or corrosion by keeping moisture from seeping in.

The crew at Off Road Evolution then secured the Rokmen sliders and corners using the provided stainless steel hardware. The Allen bolts were tightened from the inside of the body so as not to damage the fresh powdercoat.

The remaining corner bolts were installed until all were secured.

The Mercenary sliders were also secured using the provided hardware.

Rokmen supplies backing plates to provide extra strength to the mounting of the sliders.

The rear corners feature bolt holes for mounting the factory fender flares.

As a final step of the installation, the tailgate and stock taillights were installed. Metal plates are provided to space out the tailgate hinge the same degree as the corners.

The stock front flares were installed over the Rokmen sliders. No trimming was necessary for fitment.

With the Rokmen sliders and corners in place, this Wrangler Rubicon is much more prepared for the trail. The sliders and corners will resist body damage from trail obstacles.

The DOM tube guards on the corners create a great handhold for squeezing between the Jeep and the edge of the trail and will also aid in resisting body damage in many off-road situations.