Warn Industries
When Jeep released the all-new '07 Wrangler JK, Warn Industries made sure to offer the aftermarket performance parts needed to make this vehicle ready for the toughest off-road adventures. To accommodate JK enthusiasts, Warn has released front and rear Rock Crawler bumpers for the vehicle. These resilient units are constructed from 3/16-inch and 1/4-inch steel and are CNC-formed and robotically welded. They feature tapered ends for increased approach and departure angles and have welded eyelets to mount D-shackles, increasing your recovery options.
The front bumper (PN 74255) has predrilled holes to mount lights, and for added vehicle protection there's an optional front Grille Guard Tube (PN 74256). The rear Rock Crawler bumper (PN 74300) will accommodate the Warn tire carrier for the JK (PN 74299) thanks to a 1-1/2-inch solid steel shaft pin that comes up through the bumper. For durability, this shaft pin is welded - not bolted - into the bumper.To top it off, a black powdercoated wrinkle finish provides these parts with both good looks and outstanding durability.
For more information, contact: Warn Industries, (800) 543-9276, www.warn.com.
Fab Fours
Fab Fours has just released three new exciting JK bumpers: the JK front Hardcore, JK front Lifestyle, and JK rear bumper with tire carrier. The front Hardcore bumper is ready for your winch with its 3/16-inch construction throughout, 1-3/4-inch-OD tube center hoop, 1-1/2-inch-OD tube center supports, and 3/4-inch D-ring mounts. The front Lifestyle bumper offers a more contemporary Jeep look while also being constructed with the same strength as the Hardcore.
For the rear, Fab Fours continues the same solid construction with a locking swivel tire carrier which allows easy access to the rear compartment. The carrier can handle the weight and size of up to a 40-inch-tall tire.
For more information, contact: Fab Fours, (866) 469-9056, www.fabfours.com.
Mountain Off-Road Enterprises
Mountain Off-Road Enterprises' (MORE) RockProof JK bumpers are made from laser-cut 7-gauge steel and formed using a CNC break. The front bumper incorporates a winch mount and clevis mounts, and it reuses the OEM foglights. The rear incorporates wraparound corners to protect your Jeep from rock rash, and it features a 2-inch receiver hitch with safety-chain hooks. To handle your larger-size tires, you can opt for MORE's rear bumper with tire carrier. This carrier can support up to a 37-inch tire. The tire carrier also has a safety latch which will secure it in the closed and open positions.
For more information, contact: Mountain Off-Road Enterprises, (970) 625-0500, www.mountainoffroad.com.