ARB IPF 800XS Sport Driving Lights - Follow the Light

The wire leads on the lights include waterproof connectors that plug into waterproof connectors on the wiring harness. The lights are submersible in up to 11.8 inches of water for up to 2 minutes. The light's harness was routed through the grille.

The light harness relay was mounted to the backside of the grille behind the passenger-side headlight bucket.

We mounted the power fuse near the battery to the stock fuse-box mounting bracket. The yellow power lead will attach to the Optima battery, and the extra wire fill be zip-tied out of the way.

The black wire harness lead was routed through the firewall and connected to the black switch harness and yellow headlight high-beam leads. The yellow headlight tie-in includes an inline fuse with a mount, which was mounted to the driver-side interior kick panel.

The yellow headlight high-beam wire was routed through the firewall and tapped into the driver-side headlight plug. In the way that we tapped into the wires, we'll now have three light settings, including low headlight beams, high headlight beams, and high beams and IPF 800 driving beams.

The IPF push-button LED illuminated switch was secured to the dash using the provided 3M double-sided tape. We routed the switch wire lead through an existing hole in the lower dashpanel that had previously hosted a toggle switch.

As a final step in the installation, we secured the positive and negative battery cables and used zip ties to tie up the loose wires from the IPF harness.

The IPF light was a good fit to the bumper and is protected from trail dam We'll adjust the lights as needed. Lights are adjustable up and down or side to side by loosening a single mounting bolt.

The provided light covers will keep the lights safe from damage and free of dirt when the lights are not in use.