Pro Comp Stage II X Flex Jeep JK Suspension System
Pro Comp Suspension's new 4-inch Jeep JK Stage II X Flex suspension system has been designed for performance. Replacing the factory lower control arms are CNC-formed units made from 3/16-inch, A36 plate steel that has been plated for additional strength with 1/8-inch-thick gusset plates. The replacement high-angle spherical ball end is rebuildable and features polyurethane bushings. The factory alignment specifications are retained thanks to adjustable-length front upper control arms.
Heavy-duty, adjustable front and rear track bars are made from 4130N chrome-moly tubing to retain proper axle alignment. Additional custom components of the kit include: billet bumpstops, offset brake-line relocation brackets, replacement front and rear coil springs, and a set of matching MX6 monotube gas shocks.
For more information, contact: Pro Comp Suspension, (800) 776-0767, www.explorerprocomp.com.
Deaver Leaf Springs
Deaver's Progressive Series springs are high-quality 9- and 10-leaf units fabricated from the highest-grade 5160 steel. Employing a higher-leaf-count spring allows for the use of a thinner leaf material to yield a more flexible progressive leaf stack and thereby produce a much smoother spring-rate curve throughout the complete suspension cycle. Other design features include diamond-cut inner leaf ends to minimize the shear points, antifriction pads inserted between the leaves for a smoother ride and quiet operation, full military-wrapped spring eyes for superior durability, and OEM bushings.
For more information, contact: Deaver Spring, (714) 542-3703, www.deaverspring.com.
King Externally Adjustable Bypass Shocks
King's 2.0- and 2.5-inch-diameter externally adjustable bypass shocks feature 6061-T6 machined billet-aluminum parts; fully threaded, seamless steel cylinders; and large, 7/8-inch-diameter shafts that have been hard chrome-plated for extra strength. The shocks are available in two- and three-tube configurations that allow for precise adjustments of the compression and rebound damping circuits. Reservoir units are available as either piggyback units or remote-reservoir units. Best of all, each shock is completely rebuildable and revalvable for whatever type of terrain you come into contact with.
For more information, contact: King Shock Technology, (714) 530-8701, www.kingshocks.com.
JKS ACOS Pro Suspension System
The original adjustable coilover suspension system for Jeep Wrangler TJ, XJ, ZJ, and JK vehicles has incorporated an integrated bump shock into the coilover system to help prevent the suspension from bottoming out when the vehicle is traveling at high speeds or supporting heavy loads. In addition to the bumpstop technology, the system allows for quick adjustment of ride height without the removal of any components by a simple turn of the spring-retention ring. An adjustment range of between 1-3/8 inch to a full 3-3/4 inches is achievable, depending upon terrain and tire and wheel sizes.
For more information, contact: JKS Mfg., (308) 762-6949, www.jksmfg.com.