Old Man Emu Jeep TJ Heavy-Duty Suspension System
Named after one of the strongest birds on the planet, whose legs are able to handle extreme amounts of weight, the OME Jeep TJ kit consists of custom replacement coil springs and matched shock absorbers. The OME heavy-duty suspension compensates for any heavy add-on items such as front bumpers, jacks, winches, and lights. Each kit includes installation hardware, coil-spring pads, and complete instructions.
For more information, contact: ARB 4x4 Accessories, (425) 264-1391, www.arbusa.com.
Trail Tough Suzuki YJ Suspension System
Trail Tough Products' new YJ suspension system for all Suzuki Samurais allows for the full replacement of the OE Suzuki suspension, front and rear, for that of a Jeep YJ, allowing for the use of 33-inch tires and 6-1/2 inches of lift. The obvious benefits of the conversion are wider axles, larger gearing, and a more stable and performance-oriented off-roading experience.
Each kit includes new front and rear YJ mounting kits with Missing Link Shackles, complete knuckle-over-steering components, urethane bushings, extended brake lines, an extended slip-yoke, driveline spacers, front and rear upper and lower shock mounts with adjustable spring perches, and a new set of shocks.
For more information, contact: Trail Tough Products, (877) 789-8547, www.trailtough.com.
TeraFlex Jeep JK 4-inch Suspension System
TeraFlex's 4-inch JK suspension system contains everything needed for a weekend of hardcore trail-running on 37-inch tires. Included in each kit are new upper and lower FlexArms, matched shocks at all four corners, front sway-bar disconnect brackets, and an extended rear track-bar bracket. Additional items included with the kit are new bumpstops and new hardware. It is important to note that this system can be installed on both the Rubicon and Unlimited versions of the JK. Driveline modifications are required on all two-door versions.
For more information, contact: Tera Mfg., (801) 288-2585, www.teraflex.biz.
Gen-Right Three-Link Front-End Kit
Always at the forefront of off-road engineering, Gen-Right Off Road introduces its new three-link front-end kit for all Jeep TJ and YJ models. Whether you're looking to increase suspension performance or move the front axle forward to achieve a 100-inch wheelbase, this is the kit to do it.Included with each kit are 3/16-inch, laser-cut and CNC-machined brackets and mounts. Currie Johnny Joints have been used for ease of maintenance since they are rebuildable and greaseable, while the control-arm tubing is crafted from thick-wall 1/4-inch tubing that can be easily adapted to any length. The control-arm inserts are machined specifically with left- or right-side threads for adjustments.Each kit contains chrome-moly Heim ends at the track-bar ends and has Grade 8 hardware. The kit can be used with coilover shocks, 2.5-inch air shocks, or regular coil springs and may be used with 8- to 10-inch-travel shocks, tires up to 35 inches in diameter, and vehicles with 12 to 14 inches of wheel travel.For more information, contact: Gen-Right Off Road, (805) 584-8635, www.genright.com.