4Wheel Drive & Sport Utility Homepage 4Wheel Drive & Sport Utility Magazine
Home»Technical»Toyota FJ Cruiser Axle Swap - Hardcore Hardware»Photo 10

Hardcore Hardware Toyota Fj Cruiser All Pro Lower Links

Lower links take quite a bashing in the rocks, so these are made from .281-wall Dom. There's a 2.5-inch Johnny Joint at each end of the lower links. Johnny Joints are easily lubricated via grease zerks, and the joints' urethane inserts are fiendishly cheap to replace when they wear out. The upper link is made from .120-wall Dom since it's tucked out of the way above the axle.
Toyota FJ Cruiser Axle Swap - Hardcore Hardware

 Lower links take quite a bashing in the rocks, so these are made from .281-wall Dom. There's a 2.5-inch Johnny Joint at each end of the lower links. Johnny Joints are easily lubricated via grease zerks, and the joints' urethane inserts are fiendishly cheap to replace when they wear out. The upper link is made from .120-wall Dom since it's tucked out of the way above the axle.  View Related Article

 

Get Adobe Flash player

Car Research Guide