AVENGER 3.8L JEEP JK SUPERCHARGER
Avenger's new 3.8L supercharger system is packed with horsepower. Famous for its Jeep-only supercharger kits, the Avenger 3.8L system contains a purpose-built supercharger, intercooler, and all of the necessary hardware for a seamless install. With horsepower increases well above 100-plus hp and a 50-percent increase in torque, things could get interesting fast when installed under the hood of your JK.
For more information, contact:
Avenger Superchargers
(719) 594-4766
www.avengersuperchargers.com
HESCO 4.5L JEEP STROKER MOTOR KIT
The HESCO 4.5L stroker motor kit transforms your run-of-the-mill 4.0L motor into a low-end and mid-end torque monster. The kit is available in two bore-over sizes and includes a stroker crankshaft, forged pistons, high-performance connecting rods with ARP rod bolts, new piston rings, timing chain and gearset, new camshaft and lifters, and new main bearings and rod bearings.
All of the components in the kit are prebalanced, and the pistons are pressed on the connecting rods, leaving only the boring and honing of the block as the only machine work necessary.
For more information, contact:
HESCO
(205) 251-1472
www.hesco.us
HOWELL ENGINE DEVELOPMENTS UNIVERSAL WIRING HARNESS
If you're thinking of dropping that Corvette powerplant into your CJ or early-model Bronco, you might think about getting your hands on one of Howell's universal design wiring harnesses. The harnesses are available in two configurations: one for MAF systems (production years 1985-1989) and one for speed-density systems (production years 1990-1992). Each of the harnesses are 36 inches in length from the rear of the engine to the ECM connectors to allow for adequate slack in the wiring. Included in the harness are the necessary relays, ECS module wiring, injector branches, and emissions wiring.
For more information, contact:
Howell Engine Developments
(810) 765-5100
www.howellefi.com