LOD's Xpedition Series rear...
LOD's Xpedition Series rear bumper/tire carrier holds up to a 35-inch tire and includes two jerrycan mounts, a trail basket, and a Hi-Lift Jack mount. The Xpedition Series bumpers are available for YJ, TJ, and JK model Jeep Wranglers.
In addition to offering greater protection from trail obstacles, heavy-duty front and rear bumpers can transform any 4x4 into a well-prepared trail rig. The addition of a front winch bumper, for example, provides stable tow points for vehicle-recovery maneuvers, and the addition of a winch helps promote safer trail excursions in general. A heavy-duty rear bumper is also a great aid. Stable tow points are achieved, and many umpers include extras such as a swing-away spare-tire mount, a Hi-Lift Jack mount, and cargo baskets to stow extra gear.
Lod Genuine Off Road Equipment produces a whole line of its heavy-duty front winch bumpers for '87-'06 Jeep Wrangler YJs and TJs and '07-'08 Wrangler JKs. LoD's Xpedition Series rear bumper/tire carrier is also available for these Jeep models. The bumpers feature tapered ends, are manufactured from 3/16-inch-thick steel, and are powdercoated black. Two D-ring mounts are included at both the front and rear, and the rear also incorporates a 2-inch receiver hitch.
The Lod front heavy-duty bumper is offered in a "shorty" 44-inch width for increased side-to-side obstacle clearance, and a standard 54-inch width is also available. The rear Xpedition Series bumper/tire carrier is 58 inches wide and secures to the frame using 10 mounting points. The Xpedition Series bumper/tire carrier includes a Hi-Lift Jack mount, two jerrycan mounts, and a steel cargo basket to hold a cooler or other trail gear. Frame tie-in brackets are also available to increase strength, and an adjustable tire mount to accommodate various wheel-backspacing needs is included.
 The Lod front winch bumper...  The Lod front winch bumper will fit YJ, TJ, and JK model Wranglers. It's offered in the standard 54-inch width (shown) and in a "shorty" 44-inch width for those desiring increased side-to-side clearance and a narrower vehicle approach. |  A separate winch plate made...  A separate winch plate made from 1/4-inch-thick steel is used along with the LoD front bumper to mount a Warn winch. The winch plate can also be used with stock TJ bumpers and uses factory holes in the frame for mounting. The LoD winch plate accommodates most popular winch models. |  The front LoD bumper includes...  The front LoD bumper includes two D-ring mounts and two light mounts and is powdercoated black for a long-lasting finish. A Warn XD9000i winch is also installed. |