Jeep Cherokee and Wrangler Header and Intake Install - Power Takeover
On the Dyno
While we could have easily installed the JBA Cat4ward headers on our '00 Jeep Wrangler TJ and told you they functioned as intended, we decided to really put them to the test and perform a rear-wheel dyno to get some actual performance numbers. As tested, the Wrangler was equipped with an otherwise stock 4.0L I-6 engine. The Wrangler also uses the 32RH three-speed auto trans, NP231 transfer case, 4.56 gears in the stock axles, 35-inch tires, and a TeraFlex PRO-LCG suspension system. With the JBA Cat4ward headers in place, the dyno revealed an increase of 9.4 hp and 15 lb-ft of torque. View Related Article
|
|
Jeep Wrangler Research
The all new Jeep Wrangler is a good car, with practical styling to fit your lifestyle. Fuel efficiency is important and the 2010 Wrangler with a 18.6 gallon main unleaded fuel tank 15.5 capacity gets 17 mpg, and can seat 4 people comfortably. You may also be interested in the Jeep Liberty and the Ford Escape.
|
|