Dave's Customs Unlimited
The heavy-duty brake conversion kit from Dave's Customs Unlimited is designed for 1976 to 1986 Jeep CJs and 1987 to 1995 Jeep Wranglers. The heavy-duty brake conversion is a dual-diaphragm brake booster and high-pressure master cylinder designed to replace the single-diaphragm setup in Jeep vehicles. With this direct bolt-on setup increased stopping power with less pedal pressure is achieved. The kit includes a mounting bracket, the dual-diaphragm brake booster, a high-pressure master cylinder, and an adjustable push rod assembly.
Dave's Customs Unlimited
(970) 216-8179
www.davescustomsunlimited.com
EBC
EBC Yellowstuff brake pads are said to be the most gripping pad in the EBC brake pad line up. The Yellowstuff brake pads are high-friction pads that are very resistant to the heat generated through normal and heavy braking. Yellowstuff pads also feature EBC's unique Brake-in surface coating, which is a heat-applied, polymer coating with a mild abrasive particle that aids new pad bed in and scrubs off the glaze and tar spots on your rotors when the pads are first installed. The coating is designed to wear away after 50 to 100 miles to reveal the actual pad compound. In order to maintain a balanced braking system EBC advises that Yellowstuff pads be installed both front and rear.
JKS
JKS HD extended brake lines are direct replacements for the factory rubber brake hoses, and are designed to exceed the demands of extreme Jeep applications. The heavy-duty, 22-inch hoses virtually eliminate volumetric expansion to provide immediate brake pedal response and improved performance regardless of fluid pressure or temperature. The flexible Teflon inner core is chemically inert and unaffected by aging and atmospheric conditions. The inner core is protected by an exceptionally strong multi-layer Kevlar, elastomer, and stainless steel braid. A translucent UV-protected vinyl jacket adds an additional layer of defense and corrosion resistance, and one-piece adapters are permanently crimped onto each end. All HD extended brake lines are pressure tested to 4,500 psi, and far surpass all DOT and MVSS-106 requirements.
JKS
(308) 762-6949
www.jksmfg.com